What are the common problems in mold processing?

1. The accurate choice of steel.

Different products have different requirements for molds, as well as different requirements for the steel used to produce molds. Steel is divided into hot working tool steel and cold working tool steel.

2. Size.

Depending on the size of the mold, the selected steel is also different. Usually, large-size molds use pre-hardened steel, and overall hardened steel is often used for small-size molds.

3. Structure.

The product structure is different, the use function is different, the production method adopted is different, and the mold structure is also different.

4. Sequence.

The processing sequence should be operated in accordance with roughing, semi-finishing and finishing. Wrong order wastes materials and damages equipment.

5. Cutting tools.

The choice of cutting tools, different molds, different mechanisms, and different materials, the cutting tools used should also be adjusted in time according to the production situation.

6. Don't ignore the importance of mold trial

Dongguan Zhanyi Commodity Technology Co., Ltd. currently has 44 single-color injection molding machines of different tonnage and 6 dual-color injection molding machines of 360 tonnage. At the same time, it has a mold department and more than 50 sets of various plastic mold processing equipment.