How to choose a vacuum flask with good spray paint effect?

Winter is approaching, and it is the peak season for the purchase of vacuum flasks. How to choose a vacuum flask with good spray paint effect?

Many stainless steel vacuum flasks are sprayed. Some are spray paint, some spray plastic, and some use plating process. These are collectively referred to as "spray paint" in the following articles. When choosing a good "spray paint" cup, pay attention to the following points:

1. Look at the mouth of the water cup. If there is paint on the mouth of the water cup, such a water cup cannot be used.

2. Look at the position of the cup shoulder to see if the "painting" line is neat and highly consistent. If there are obvious burrs and the high speed is inconsistent, the production process is not good.

3. Look at the body of the cup to see if there are any traces left after "painting". Any traces indicate that the spray paint process of the water cup is not adequate; Then touch the whole body with your hand, and feel whether it is smooth. If you feel the obvious roughness and graininess, it means that the spray paint process of the water cup is not good; Finally, pick up the water cup and face the strong sunlight to see if the color of the paint surface is consistent. If the above problems occur, it is recommended not to choose, because the surface paint of such a water cup is easy to fall off.

4. Look at the bottom of the cup. If the bottom of the cup is also painted with the same paint, check whether it is thicker than the paint on the body of the cup, because the bottom of the cup will often rub. If the bottom of the cup is too thin, it will easily fall off when rubbed.

Dongguan Zhanyi Commodity Technology Co., Ltd. has a dust-free spraying production line. The stainless steel water cups produced are sprayed at high temperature. The automatic spraying process will use different spraying standards according to different positions of the water cup.

All stainless steel water cups have passed the 100 grid test, and the spraying process can be adjusted according to customer requirements, and can pass the dishwasher test. Buyers from all over the world are welcome to contact our salespersons to obtain samples, and welcome everyone to visit our factory. We are willing to serve you wholeheartedly.